Vaisala WMS302 Betriebsanweisung PDF herunterladen (Seite 14)

User's Guide ______________________________________________________________________

12 ___________________________________________________________________M210630EN-B

ESD Protection

Electrostatic Discharge (ESD) can cause immediate or latent damage to

electronic circuits. Vaisala products are adequately protected against

ESD for their intended use. However, it is possible to damage the

product by delivering electrostatic discharges when touching,

removing, or inserting any objects inside the equipment housing.

To make sure you are not delivering high static voltages yourself:

- Handle ESD sensitive components on a properly grounded and

protected ESD workbench. When this is not possible, ground

yourself with a wrist strap and a resistive connection cord to the

equipment chassis before touching the boards. When neither of the

above is possible, at least touch a conductive part of the equipment

chassis with your other hand before touching the boards.

- Always hold the boards by the edges and avoid touching the

component contacts.

WARNING

Be careful when erecting the mast. See that there are no power lines or

other obstacles above the mast.

WARNING

Secure the mast properly to prevent it from falling. Tighten all the

adjustment screws securely.

CAUTION

Do not make changes to the wiring. Incorrect wiring can damage the

device and prevent it from operating correctly.

CAUTION

Be careful when moving the mast. To prevent damage to the sensors,

remove them (and the sensor arms) before moving the station.

NOTE

When disposing of old batteries, be sure to do so in accordance with

all regulations applicable in your area.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 261 262

Keine Kommentare

Vaisala WMS302 Betriebsanweisung Seite 14