Vaisala PTU300 Betriebsanweisung PDF herunterladen (Seite 114)

USER'S GUIDE____________________________________________________________________

112 _________________________________________________________________ M210796EN-E

PLAY [x] [start_date start_time end_date end_time]

where

x = Number of the data file that will be outputted, range 0 ... 21.

The numbers correspond to the output of the DIR command;

refer to the example on page 110.

Selecting number 0 will output all data files.

start_date = Starting date of the interval to be outputted. Must be given in

the following format: yyyy-mm-dd

start_time = Starting time of the interval to be outputted. Must be given in

the following format: hh:mm:ss

end_date = Ending date of the interval to be outputted. Must be given in

the following format: yyyy-mm-dd

end_time = Ending time of the interval to be outputted. Must be given in

the following format: hh:mm:ss

Example:

>play 3 2007-05-05 00:00:00 2007-05-06 00:00:00

RH (12 min intervals) 2007-05-05 00:00:00 121

Date Time trend min max

yyyy-mm-dd hh:mm:ss %RH %RH %RH

2007-05-05 00:00:00 19.16 18.99 19.33

2007-05-05 00:12:00 19.30 19.09 19.55

2007-05-05 00:24:00 20.01 19.28 21.17

2007-05-05 00:36:00 21.21 20.98 21.44

2007-05-05 00:48:00 19.57 17.72 21.11

2007-05-05 01:00:00 19.09 18.62 19.84

...

The <ESC> key can be used to interrupt the output listing.

NOTE

Output of large amounts of recorded data can result in huge data files and

take a long time, up to several days for the entire memory of the data

logger at 10 second resolution. To make it easier to process the data it is

recommended to select the largest suitable data interval, and to specify

the start and end times carefully.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 185 186

Keine Kommentare

Vaisala PTU300 Betriebsanweisung Seite 114