Vaisala HMP60 Betriebsanweisung PDF herunterladen (Seite 47)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 45

Connect to the Probe in POLL Mode

Use the OPEN command to connect to a probe that is in POLL mode.

OPEN [aa]<cr>

Where

aa = address (0 ... 99)

Example:

open 1

HMP110 1 line opened for operator commands

Close the Connection in POLL Mode

The CLOSE command closes the connection to the probe.

CLOSE<cr>

Example:

line closed

Reset the Probe

Use the RESET command to reset the probe. Upon reset or power-up,

the probe enters the serial mode that has been set with the SMODE

command.

RESET<cr>

Example (probe set to serial mode STOP, will output probe model and

software version at reset):

reset

HMP60 / 1.00.0

Example (probe set to serial mode RUN, will start to output measurement

messages at reset):

reset

T= 23.6 'C RH= 20.2 %RH Td= -0.5 'C

T= 23.3 'C RH= 20.2 %RH Td= -0.8 'C

...

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Keine Kommentare

Vaisala HMP60 Betriebsanweisung Seite 47