Vaisala HMP60 Betriebsanweisung PDF herunterladen (Seite 22)

User's Guide ______________________________________________________________________

20 __________________________________________________________________ M211060EN-C

Mounting the Probe

HMP60, HMP110 and HMP110T are designed to be mounted from the

M12 thread on the probe body or from the smooth part of the probe body.

For a convenient installation, use the optional installation accessories:

- Use the plastic mounting nuts to hold the probe in a through-wall

installation.

- Use the probe mounting clamp to hold the probe on a wall.

NOTE

Avoid placing the probe in a place where condensation can run onto the

sensor.

Probe Assembly with Duct Installation Kit

0505-177

Figure 11 Assembly of the Probe with Duct Installation Kit

The following numbers refer to Figure 11 above:

1 = HMP60, HMP110 or HMP110T probe

2 = Duct installation kit

3 = Probe cable

1. Slide the probe cable through the duct installation kit plastic pipe.

2. Attach the cable to the probe.

3. Attach probe assembly to the duct.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

Keine Kommentare

Vaisala HMP60 Betriebsanweisung Seite 22