Vaisala HMP60 Betriebsanweisung PDF herunterladen (Seite 44)

User's Guide _______________________________________________________________________

42 ___________________________________________________________________ M211060EN-F

Set Probe Address

Use the ADDR command to view or set the probe address. To operate in

the POLL mode, the probe must have an address. If multiple probes share

the same serial line, each probe must have a different address.

For a description of the serial interface modes, see section Set Serial Line

Settings on page 39.

ADDR [nn]<cr>

where

address (0 ... 255)

Example:

addr

Address : 0

Set Serial Interface Delay

Use the SDELAY command to view or set the serial interface answer

minimum delay.

SDELAY [delay]<cr>

where

delay

Range 0 ... 255. Value corresponds to four

milliseconds (for example, 5 = 0.020 second

minimum answer delay)

Example:

sdelay

Serial delay : 30

sdelay 50

Serial delay : 50

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 72 73

Keine Kommentare

Vaisala HMP60 Betriebsanweisung Seite 44