Vaisala HUMICAP HMP46 Betriebsanweisung PDF herunterladen (Seite 27)

HMI41 AND PROBES

M210316EN-A Operating Manual

Select the interval with buttons ▲ and ▼. The measurement interval can be

selected in steps according to the following:

• 1 - 5 min: each pressing = 1 minute

• 10 min; 15 min; 30 min

• 1 - 6 h: each pressing = 1 hour

• 12 h

The text 'LO' on the display indicates that there is not enough memory for the

chosen interval; select a longer interval. When you press ENTER, a text

similar to the following appears:

set

T°C

This is the measurement mode with the data collecting feature activated. It can

be distinguished from the normal measurement mode by the text 'SET' on the

lower lefthand corner of the display. The readings on the display are updated

once a minute, and the display is dim except during this updating in order to

minimize the consumption. If the indicator is turned off, the measurements

stored so far remain in the memory and they can be read by turning the

indicator on in the REC READ mode (see section 6.5).

You can end the data collecting by pressing ON/OFF.

6.5 Reading the measurement results

The measurement results can be read in the REC READ mode. This mode can be

entered from the REC AUTO mode by pressing twice the button MODE. The

following appears:

Press ENTER, and a text similar to the following appears on the display:

T°C

Numbers on the first line indicate the reading of the quantity in question (in

this example, RH). The number on the left on the second line (in this example

number 0.) is the sequence number of the measurement. This number helps to

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

Keine Kommentare

Vaisala HUMICAP HMP46 Betriebsanweisung Seite 27