Vaisala DRYCAP DM70 Betriebsanweisung PDF herunterladen (Seite 22)

USER'S GUIDE____________________________________________________________________

3 = Selected quantities. Up to three of the following quantities

can be selected at a time: dewpoint (T

d/f

), relative

humidity (RH), absolute humidity (a), mixing ratio (x), parts

per million (H

O), temperature (T).

4 = The Graphic

shortcut button changes the display into a

curve mode.

5 = The Hold/Sa

shortcut button holds the display and allows

you to save the reading into the memory.

6 =

The Record shortcut button takes you to the

Recording/Viewing menu. This is the default shortcut

button. In the figure it has been changed to Start/S.

The Graphic, Hold/Sa, and Record functions above the shortcut

buttons are set at the factory. You can change them to refer to other

functions as shown in Figure 4 on page 19 where Start/S has replaced

Record. See also section Program Shortcut Keys on page 38.

Menus

The settings can be changed and functions can be selected in the

menus. Follow the instructions below:

1. Open the main menu by pressing one of the buttons.

2. Press Open within 5 seconds. Otherwise, the basic display

returns. If this happens, start from step 1 again.

3. Move in the menus using the

buttons.

4. Select an item with the

button.

5. To return to the previous level, press .

6. To return to normal operation, press Exit.

20 __________________________________________________________________ M010091EN-F

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 92 93

Keine Kommentare

Vaisala DRYCAP DM70 Betriebsanweisung Seite 22