Vaisala HUMICAP DMT132 Betriebsanweisung PDF herunterladen (Seite 52)

USER'S GUIDE____________________________________________________________________

50 __________________________________________________________________ M211289EN-A

When replacing the filter, note the following:

- Touching the filter with your fingers will also deposit oil and dirt on

the filter, which may affect the measurement. Always handle the filter

with gloved hands.

- When installing the transmitter after a filter change, inspect the

sealing ring first. Use a new one if the old ring is visibly damaged.

1102-003

Figure 24 Opening the Filter

1102-004

Figure 25 Filter Structure

where

1 = Sealing ring (replace if damaged)

2 = Vaisala HUMICAP® 180R sensor and Pt1000 temperature

sensor

3 = Spring washer

4 = Tube filter

Replace the filter as follows:

1. Turn the filter counterclockwise until it is loose.

2. Pull the filter straight out carefully; do not damage the sensors, and

do not lose the spring washer.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 73 74

Keine Kommentare

Vaisala HUMICAP DMT132 Betriebsanweisung Seite 52