Vaisala HMP243 Betriebsanweisung PDF herunterladen (Seite 30)

HMP240

User's Guide M210300en

5.3.4.2 Selecting and scaling the analogue output quantities

Disconnect the security lock jumper!

• Select Mode in the main menu and Analog outputs in the Mode

menu:

• Select Scale. The quantity and scaling for channel 1 are displayed:

• If the settings are correct, press ENT.

• If the settings need to be changed, press CL:

− the quantity (RH, T, Td, dT, x, a, Tw) starts flashing; it can be

changed with the arrow keys and acknowledged with the ENT key

− the lower limit starts flashing

− acknowledge the lower limit with ENT or start changing it by

pressing CL; a new lower limit is given with the arrow keys

− the upper limit starts flashing

− acknowledge the upper limit with ENT or start changing it by

pressing CL; a new upper limit is given with the arrow keys

• When channel 1 has been set, the programme goes on to channel 2;

the procedure is the same as with channel 1.

Please note that the available selections are affected by the choice of output

parameters. Also make sure that the temperature measuring ranges are not

exceeded.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 129 130

Keine Kommentare

Vaisala HMP243 Betriebsanweisung Seite 30