Vaisala MMT330 Bedienungsanleitung PDF herunterladen (Seite 97)

Chapter 4 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 97

Formatting Serial Line Message

NOTE

Instead of using the

FTIME and FDATE commands described in this

section, you can use the

FORM command with modifiers TIME and

DATE. See section

FORM on page 98.

FTIME and FDATE

FTIME and FDATE commands will enable/disable output of time and

date to the serial line. To add time to R and SEND outputs enter:

FTIME [x]<cr>

To add date to R and SEND outputs enter:

FDATE [x]<cr>

where

ON or OFF

Example:

>send

aw= 0.277 T= 23.5 'C

>ftime on

Form. time : ON

>send

00:16:07 aw= 0.277 T= 23.5 'C

>fdate on

Form. date : ON

>send

2000-01-01 00:16:15 aw= 0.277 T= 23.5 'C

General Settings

Changing Quantities and Units

To change quantities and units use serial commands or the optional

display/keypad. The MMT330 measures the following quantities:

- Water activity (aw)

- Temperature (T) (metric unit: ºC, non-metric unit:ºF)

NOTE

Only the quantities selected when ordering the device can be selected as

display output quantit

ies.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 170 171

Keine Kommentare

Vaisala MMT330 Bedienungsanleitung Seite 97