Vaisala WXT520 Bedienungsanleitung PDF herunterladen (Seite 18)

Appendix A. Configuring the WXT520

6. Go to the Device Settings Screen and enter the settings for each of the

parameters (see FIGURE A-2). Default settings are:

• Device—Address: 0

• Heating and self diagnostic—verify Enable Heating is NOT

selected.

• Heating and self diagnostics—Update Interval: 15 s

• Communication protocol—select SDI-12 v1.3

• User port settings—Port type: SDI-12, select continuous

measurements

FIGURE A-2. Device Settings screen

7. Click on the OK button.

8. Go to the Sensor Settings Screen (see FIGURE A-3). The default Wind

and PTU Update intervals are set to 5 s.

A-2

1 2 ... 13 14 15 16 17 18 19 20 21 22

Keine Kommentare

Vaisala WXT520 Bedienungsanleitung Seite 18