Vaisala HUMICAP MMT310 Betriebsanweisung PDF herunterladen (Seite 14)

USER'S GUIDE____________________________________________________________________

12 __________________________________________________________________ M210474EN-B

Mounting the transmitter/Removing the

transmitter unit

1. Mount the plate onto the wall by using four/two screws (∅4.5 mm/6.0 mm).

2. Place the transmitter onto the mounting plate and fasten it by using two allen

screws.

The transmitter module can be unfastened for calibration by releasing two allen

screws on the left side.

Mounting with bigger mounting plate Mounting with smaller mounting plate

NOTE

It is recommended that the supply is switched off, before connecting the

cable plug to transmitter during installation or service/calibration.

Four screw holes (∅

4.5 mm) for wall

mounting

(

screws not

rovided

)

Two allen screws for

fastening/removing the

transmitter module

(allen key provided)

Two screw holes (

∅

6.0 mm) on the base of

the plate for wall

mounting (screws not

provided)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 62 63

Keine Kommentare

Vaisala HUMICAP MMT310 Betriebsanweisung Seite 14